kiaturn 15lms 411 servo alarm c axis

Results 1 to 1 of 1

Thread: kiaturn 15lms 411 servo alarm c axis

  1. #1
    Registered
    Join Date
    Feb 2008
    Location
    USA
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default kiaturn 15lms 411 servo alarm c axis

    My kia lathe has trouble while running g12.1 when the x axis gets near the center of the main spindle. The c axis tries to speed up too much and produces an alarm: 411 servo alarm c axis excess error

    Other wise as long as I stay away from x zero the c axis works just fine.

    Anyone with similar problems? Advice would be appreciated.

    by the way, control is fanuc oitb

    Similar Threads:
    Last edited by rsm169; 08-13-2009 at 04:11 PM. Reason: forgot stuff


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

kiaturn 15lms 411 servo alarm c axis

kiaturn 15lms 411 servo alarm c axis