postprocessor to mate one of the surfCAM
MEFI CNC-859 (CNC 872 ITD)
HAIDENHAIN-TNC 310
If someone you have these postp. and you were so willing to share and so I was very grateful to you send mail to xboos@seznam.cz
Wanted is a long time
Yes, in surfCAMu those processor what you wrote but the TNC 310 is not there. Yet we do not have this control system in the world if only we. Anybody would be so willing to help me create a postprocessor for HEIDENHAIN TNC 310
??
but I do not know how to the creation of the post-processor.
Hand-written program looks like this is a simple program but it would suffice as an example:
Program for HEIDENHAIN TNC 310
0 BEGIN PGM TvarL_10 MM
1 BLK FORM 0.1 Z X-20 Y+0 Z+0
2 BLK FORM 0.2 X+0 Y+116 Z+40.8
3 TOOL CALL 1 Z S800
4 L Z+50 F6000
5 L X-520 Y+140 M13
6 L Z+38.8
7 CALL LBL 1
8 L Z+36.8
9 CALL LBL 1
10 L Z+34.8
11 CALL LBL 1
12 L Z+32.8
13 CALL LBL 1
14 L Z+30.8
15 CALL LBL 1
16 L Z+28.8
17 CALL LBL 1
18 L Z+26.8
19 CALL LBL 1
20 L Z+24.8
21 CALL LBL 1
22 L Z+22.8
23 CALL LBL 1
24 L Z+20.8
25 CALL LBL 1
26 L Z+20
27 CALL LBL 2
28 L Z+18
29 CALL LBL 2
30 L Z+16
31 CALL LBL 2
32 L Z+14
33 CALL LBL 2
34 L Z+13
35 CALL LBL 2
36 L X-520 Y+71.5 F6000
37 L Z+12
38 L X+30 F200
39 L Z+15 F6000
40 L X-520 Y+83
41 L Z+11
42 L X+30 F200
43 L Z+15 F6000
44 L X-520 Y+94.5
45 L Z+10
46 L X+30 F200
47 L Z+15 F6000
48 L X-520 Y+106
49 L Z+9
50 L X+30 F200
51 L Z+15 F6000
52 L X-520 Y+117.5
53 L Z+8
54 L X+30 F200
55 L Z+50 F6000
56 L X-520 Y+12
57 L Z+39.8
58 L X+30 F200
59 L Z+90 F6000
60 L X+130 Y+330 M30
61 LBL 1
62 L X-520 Y+140 F6000
63 L Y+116
64 L X+30 F200
65 L Y+140 F6000
66 L X-520
67 L Y+78
68 L X+30 F200
69 L Y+140 F6000
70 L X-520
71 L Y+44.8
72 L X+30 F200
73 L Z+50 F6000
74 L X-520 Y+140
75 LBL 0
76 LBL 2
77 L X-520 Y+140 F6000
78 L Y+116
79 L X+30 F200
80 L Y+140 F6000
81 L X-520
82 L Y+87
83 L X+30 F200
84 L Y+140 F6000
85 L X-520
86 L Y+58
87 L X+30 F200
88 L Z+50 F6000
89 L X-520 Y+140
90 LBL 0
91 END PGM TvarL_10 MM