While waiting for parts to arrive from CNCRP I've decided to start on my stand. I ordered a Pro series. Can someone measure from the bottom of the base railing (essentially the bottom of the machine) to the top of the stepper motor on an 8 inch Z axis at its highest point? I need to know the maximum height footprint. I already know the length and width footprint from the website.
Thanks! Scott
The height from the bottom of the machine bed to the motor of the 8" Ballscrew Z is 36". If you add a cable track kit it is 43" from the machine bed to the cable track on the Z axis.
Reply with Quote
Need height measurement
