CNC Plasma Water Table Bladder Tank Question.

[uvmetal]

Hi, I'm building a water table to go with my soon to arrive bulltear 4'x4' gantry kit. I'm considering using a 42 gallon plastic water tank for the air bladder water table drainage reservoir. Does anyone have any experience with this type of tank? I would lay it on its side with the 1 1/4" hose barb closest to the floor and have the air in and out on the top. The water table will have 3" walls with 2 1/2"- 2 3/4" of water in it.


Image of tank

Similar Threads:

• Greencut water table/tank liquid thread
• Plasma Water Table Question
• 4x8 plasma table with bladder style water tray
• water table level control using air tank.
• plasma water tank

[Dustin407]

Yes, the plastic tank should work for you fine. My question is how are you going to attach the slats to the plastic without making potential leaks...?

[uvmetal]

I'm welding a steel tube to the bottom of water tray, the hose clamping a vinyl tube to it and the tank. I'm just waiting for the gantry kit now.