5 Axis


Results 1 to 5 of 5

Thread: 5 Axis

  1. #1
    Member GJeff's Avatar
    Join Date
    Jan 2013
    Location
    USA
    Posts
    263
    Downloads
    0
    Uploads
    0

    Default 5 Axis

    Shop Sabre doesn't offer any 5 axis options do they? Is there anyone out there who has taken a shop sabre and added this to their machine?

    And assuming they don't offer it, are there any competitors in a similar price range and quality (I really like how they use ballscrews) that would offer this as an addon?

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2010
    Location
    united states
    Posts
    77
    Downloads
    0
    Uploads
    0

    Default Re: 5 Axis

    I don't think they have a machine with enough Z clearance for a 5th axis. If you call them, Brandon is very helpful. I have a different machine now with rack instead of ball screws and it cuts as good if not better than the ball screws did. I wouldn't rule out a rack design myself.



  3. #3
    Member routalot's Avatar
    Join Date
    Dec 2003
    Posts
    1204
    Downloads
    0
    Uploads
    0

    Default Re: 5 Axis

    Have you factored in the cost of 5 Axis software to your ruminations?It usually gets expensive to move to that level of capability.



  4. #4
    Member GJeff's Avatar
    Join Date
    Jan 2013
    Location
    USA
    Posts
    263
    Downloads
    0
    Uploads
    0

    Default Re: 5 Axis

    kenrbass, you're a camaster guy now right? I don't think I can be sold on a helical rack and pinion being comparable to a proper ballscrew setup. Even if you can demonstrate the same backlash (which camaster doesn't even attempt, in their faq they just say "well 200k machines use this tech, so it must be good"), ballscrews will have way less friction. Rotating the nut around a static ballscrew is just pretty slick.

    I saw their aggregate c axis video ( ) and considering this is a tool attached to the spindle and they still have a bit of room to play with, but not much. An actual B/C would mount higher, and might be doable, at least for 4-5 inches of Z workspace I think. Could be wrong.

    routalot you mean controller or cam? I'd use Fusion 360 for CAM. If I had to change the control software I'd use linuxCNC.



  5. #5
    Member routalot's Avatar
    Join Date
    Dec 2003
    Posts
    1204
    Downloads
    0
    Uploads
    0

    Default Re: 5 Axis

    I would thin it will be challenging and expensive for a hobby user to find both cam software with a dedicated postprocessor and a controller that will run 5 axes.It gets significantly more demanding if you hope for simultaneous 5 axis working.If there is something suitable,I imagine a lot of people would like to know about it.I imagine it gets a little easier if you limit yourself to trunnion mounted tables mounted on a 3 axis machine.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

5 Axis

5 Axis