Problem Uneven cuts, 1/4" off


Results 1 to 4 of 4

Thread: Uneven cuts, 1/4" off

  1. #1
    *Registered User* Lisa_jenson1982's Avatar
    Join Date
    Sep 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Question Uneven cuts, 1/4" off

    I have a shop sabre IS series. I have noticed that I don't have the sharp edges on fiberboard that we used to have. One chair will be fine, but the one next to it will be off.

    I did notice the router spindle was loose, so we tightened it up. But we have to keep tightening it up every other day. I have not checked other bolts, but I will monday morning.

    Also, noticed the boards are always off on the X axis at least 1/8 off to sometimes a half inches off. Had Ben get in the computer and he seemed to fix it for that one day, but it's doing it again!

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    33403
    Downloads
    0
    Uploads
    0

    Default Re: Uneven cuts, 1/4" off

    1) Use blue Loctite.

    2) What did he do to fix it?

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    *Registered User* Lisa_jenson1982's Avatar
    Join Date
    Sep 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ger21 View Post
    1) Use blue Loctite.

    2) What did he do to fix it?
    I will tell Maintance man to put some loctite on it.

    I honestly don't know what Ben did, he got in the team viewer and changed a dimension setting for the x axis I believe. I will pay attention next time I call him this week.



  4. #4
    *Registered User* Lisa_jenson1982's Avatar
    Join Date
    Sep 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Uneven cuts, 1/4" off

    I ended up calling Shop Sabre and Ben got into the Win CNC file and changed the x axis demention....and it fixed the measurements,



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Uneven cuts, 1/4" off

Uneven cuts, 1/4" off