- Build Thread- Installoing Mach4 on the Shopmaster
-
Member
Installoing Mach4 on the Shopmaster
I have installed Mach4 on my 2012 Shopmaster. It was quite a laborious process, with much trial and error, and error, and error! To save others the trouble, I'm posting a link to a document I wrote detailing the steps needed to run Mach4. By the way, I believe its a big improvement over Mach3. I also use Fusion 360 processors without a problem on the Shopmaster. The file is too large to upload and so here's a link to access the file.
https://docs.google.com/document/d/1...it?usp=sharing
The usual caveats apply: don't blame me for any errors in the document. If you do find any, do let me know.
Joe
ps; you can also email me outside the forum at j2mariashop@gmail.com if you have any questions.
Similar Threads:
-
- Build Thread- Installoing Mach4 on the Shopmaster
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules