Configuration files for a Millturn and Darwin

Results 1 to 3 of 3

Thread: Configuration files for a Millturn and Darwin

  1. #1
    Member NDBoyd's Avatar
    Join Date
    Dec 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Configuration files for a Millturn and Darwin

    I'm looking for configuration files for a new mill turn for Mach 4 and Darwin. I'm a new user and it doesn't seem to make sense to start on Mach 3.

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2016
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Configuration files for a Millturn and Darwin

    March 6, 2020

    NDBoyd

    I'm not able to help you. I scraped Mach 3 in favor of Mach 4 shortly after I received my machine. I wanted to run a newer computer with a later version of Windows (I run Windows 7 on most of my PCs). I wanted to dump the clunky parallel printer port for the more robust USB port. Unfortunately, I could not find a motion controller the worked with USB that I could easily configure. I tried at least two, and possibly three, USB to Gecko 540 motion controllers. I also quickly discovered that Mach 4 did not support backlash compensation (at least at the time I was attempting to use it; maybe it does now). For the most part I found Mach 4 to be incomplete software and still a work in progress.

    I've since completely rebuilt/rewired my system to use the hobbyist level Acorn Board from Centroid CNC. I am now running CentroidCNC12 Version 4.20. It is a much more robust, industrial grade CNC software. It interfaces with the Gecko 540 controller without any problems. The only downside that I've found is that Fusion 360 does not have a post processor for the Centroid lathe function. For minor lathe work, I am using Centroid's conversational programming software. It is working for me for facing, minor turning, and threading operations. I'll need to continue to research lathe post processors if I want to get into more complicated turning operations.

    Again, I'm sorry that I'm not much more help. I've moved to the Centroid CNC products and have never looked back.


    Britt



  3. #3
    Member NDBoyd's Avatar
    Join Date
    Dec 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Configuration files for a Millturn and Darwin

    Thanks for the input. My frustration has me headed down the same path you are. I have Mach 3 running and getting some basics accomplished. However, I thought newer software on a newer computer made sense for the future. I do appreciate the reply. Thanks Britt!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Configuration files for a Millturn and Darwin

Configuration files for a Millturn and Darwin

Configuration files for a Millturn and Darwin