Mill Turn 5C chuck

Results 1 to 5 of 5

Thread: Mill Turn 5C chuck

  1. #1


  2. #2
    Member Goodlett's Avatar
    Join Date
    Aug 2011
    Location
    USA
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Mill Turn 5C chuck

    Yes, I got a cheap one from China and made the back plate.

    Mill Turn 5C chuck-5c-chuck-jpg



  3. #3
    Member
    Join Date
    Jan 2010
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Mill Turn 5C chuck

    Did you happen to make a drawing of the backing plate? I wasn't sure if the cheap one would be to small to mount to the spindle. I couldn't find any specific dimensions for the chuck on any of the websites.



  4. #4
    Member Goodlett's Avatar
    Join Date
    Aug 2011
    Location
    USA
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Mill Turn 5C chuck

    I had a sketch at the time, but, it is long since gone. These are important measurements I found on my phone.

    Mill Turn 5C chuck-img_3360-jpg

    Mill Turn 5C chuck-img_3362-jpg

    Mill Turn 5C chuck-img_3363-jpg

    Mill Turn 5C chuck-img_3364-jpg

    I ordered a chuck and back plate like this one.

    https://www.ebay.com/itm/BOSTAR-5C-C...EAAOSwtutcMgoU

    I'll look around and see what else I can find.



  5. #5
    Member Goodlett's Avatar
    Join Date
    Aug 2011
    Location
    USA
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Mill Turn 5C chuck

    A few more photos.

    Also you could use the collet blocks and drawbar that Shopmaster sells. Works with a 3, 4, or 6 jaw chuck.

    Mill Turn 5C chuck-img_1119-jpg

    Mill Turn 5C chuck-img_1121-jpg

    Mill Turn 5C chuck-img_1122-jpg

    Mill Turn 5C chuck-img_1123-jpg

    Mill Turn 5C chuck-img_1124-jpg

    Mill Turn 5C chuck-img_1125-jpg



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mill Turn 5C chuck

Mill Turn 5C chuck

Mill Turn 5C chuck