New Machine Build Stabilize z axis spindle arm.

Results 1 to 1 of 1

Thread: Stabilize z axis spindle arm.

  1. #1
    Member
    Join Date
    Mar 2016
    Location
    United States
    Posts
    46
    Downloads
    0
    Uploads
    0

    Default Stabilize z axis spindle arm.

    Good morning, recently I built a stabilizer for the spindle arm of my 1991 SHOPTASK MILL. With X amount of force applied perpendicular to the arm at the Z spindle axis the dial read out was .003". With the stabilizer arm attached to tail stock as shown in the photos and the same X force applied the read out was about 0 to .0005". (See attached photos) don't do much lathe operations with this machine, It works for me!Stabilize z axis spindle arm.-retro-z-stable-001-jpgStabilize z axis spindle arm.-retro-z-stable-002-jpgStabilize z axis spindle arm.-retro-z-stable-003-jpg

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Stabilize z axis spindle arm.-retro-z-stable-001-jpg   Stabilize z axis spindle arm.-retro-z-stable-002-jpg   Stabilize z axis spindle arm.-retro-z-stable-003-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Stabilize z axis spindle arm.

Stabilize z axis spindle arm.