Need Help! Z axis switch


Results 1 to 2 of 2

Thread: Z axis switch

  1. #1
    Member pythonsoft's Avatar
    Join Date
    Apr 2019
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Z axis switch

    Hi I have fitted a switch to my z axis for a floating switch, it is set in inputs as 1 pin13 and when I trip the switch manually it lights up In diagnostics as m3 home but when I move the z axis the switch does not stop it .

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Z axis switch

    If you are setting this switch as "probe"....the switch stop Z axis only with command G31. Testing G31 Z-200 F300 and Z axis will stop when lights up.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Z axis switch

Z axis switch