Please check if G04P command is generated by sheetcam, and check if the G04 command works on your machine.
Hi all I’m trying to get my pierce delay to work in sheetcam on my home made Cnc plasma gantry and no success , I think it’s just using the 0.5seconds as default time, I’m using mach3 for Cnc plasma ,Not sure if I’m missing anything or doing anything wrong ,any suggestions?
Attached are pics from of my current settings in spindle setup in mach3 and jet tool in sheetcam
Thanks
Bradley
Sent from my iPhone using Tapatalk
Similar Threads:
Please check if G04P command is generated by sheetcam, and check if the G04 command works on your machine.
In shetecam you setting delay in seconds....make same setting in mach3.