Wrong post processor? There is no lead in on my. Parts for plasma.


Results 1 to 2 of 2

Thread: Wrong post processor? There is no lead in on my. Parts for plasma.

  1. #1
    Registered
    Join Date
    Jul 2017
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Wrong post processor? There is no lead in on my. Parts for plasma.

    I have a home built CNC plasma machine running a hypertherm 45 XP I haven't cut in pretty good but I'm having some trouble with my lead Ins And Lead outs delete out cuts no problem but it seems as if I don't have a lead in when I look at the piece after I cut. I'm running Mach 3 and sheetcam it has anybody had this problem before

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Wrong post processor? There is no lead in on my. Parts for plasma.-20180117_124840-jpg  


  2. #2
    Registered coherent's Avatar
    Join Date
    Apr 2003
    Location
    Arizona, USA
    Posts
    500
    Downloads
    2
    Uploads
    0

    Default Re: Wrong post processor? There is no lead in on my. Parts for plasma.

    Old post, but if there isn't room for the lead in or lead out then it won't cut with one... shorten the lead distance or use and arc instead etc.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Wrong post processor? There is no lead in on my. Parts for plasma.

Wrong post processor? There is no lead in on my. Parts for plasma.