Post processor for grbl


Results 1 to 3 of 3

Thread: Post processor for grbl

  1. #1
    Registered
    Join Date
    Nov 2007
    Location
    Canada
    Posts
    52
    Downloads
    0
    Uploads
    0

    Default Post processor for grbl

    Hi guys i am using grbl for a cnc plasma table i have been using sketchucam and it works well but there are some plasma functions it does not have (leadins, leadouts, peirce height etc.) so i down loaded sheetcam it has all the stuff i need but not sure which ppst to use for grbl? Or is there one in the list that will work at all? Or maybe there is some other way to make it work?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2007
    Location
    Canada
    Posts
    52
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by kermit582 View Post
    Hi guys i am using grbl for a cnc plasma table i have been using sketchucam and it works well but there are some plasma functions it does not have (leadins, leadouts, peirce height etc.) so i down loaded sheetcam it has all the stuff i need but not sure which ppst to use for grbl? Or is there one in the list that will work at all? Or maybe there is some other way to make it work?
    nobody know anything about this?



  3. #3
    Member Bubba's Avatar
    Join Date
    Mar 2004
    Location
    lagrange
    Posts
    1804
    Downloads
    27
    Uploads
    0

    Default Re: Post processor for grbl

    If you can't find one, I suggest you write it up on the Sheetcam forum. Les has always been responsive to providing new posts or suggestions on which one to use.

    Art
    AKA Country Bubba (Older Than Dirt)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post processor for grbl

Post processor for grbl