The servo drive is disconnected Axis CR1


Results 1 to 2 of 2

Thread: The servo drive is disconnected Axis CR1

  1. #1
    sajidkarlal's Avatar
    Join Date
    Dec 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default The servo drive is disconnected Axis CR1

    I have been facing an error. the error is servo drive is disconnected axis cr1 (gmm 275 Nc in emergency)
    I already change the cable and the motor also but the original problem is still there.



  2. #2
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    1516
    Downloads
    0
    Uploads
    0

    Default Re: The servo drive is disconnected Axis CR1

    Quote Originally Posted by sajidkarlal View Post
    I have been facing an error. the error is servo drive is disconnected axis cr1 (gmm 275 Nc in emergency)
    I already change the cable and the motor also but the original problem is still there.
    I'd have gotten a multimeter and checked all cables from plc to driver first for any breaks.
    Then encoder line.
    Then motor cable / motor.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

The servo drive is disconnected Axis CR1

The servo drive is disconnected Axis CR1