Need Help! Recommendations for a lathe servo spindle drive


Results 1 to 2 of 2

Thread: Recommendations for a lathe servo spindle drive

  1. #1
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4922
    Downloads
    0
    Uploads
    0

    Default Recommendations for a lathe servo spindle drive

    It's time to repower my lathe spindle because I need a C axis. My current setup (Fanuc motor powered by a VFD) does not allow that.

    I'm trying to avoid buying something from eBay. I could add a servo to my existing setup, but I'm trying to avoid that also.

    5.5KW – 7.5KW
    200V (240V) , 3 Phase
    Max RPM 3000
    +/- 10V analog control capable

    For this application I do not need purpose built spindle motor.

    Any recommendations?

    Similar Threads:
    Jim Dawson
    Sandy, Oregon, USA


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4922
    Downloads
    0
    Uploads
    0

    Default Re: Recommendations for a lathe servo spindle drive

    Bump !

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Recommendations for a lathe servo spindle drive

Recommendations for a lathe servo spindle drive

Recommendations for a lathe servo spindle drive