fanuc motor


Results 1 to 4 of 4

Thread: fanuc motor

  1. #1
    Member
    Join Date
    Nov 2006
    Location
    USA
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default fanuc motor

    what would be a good alternative drive for a fanuc A06B-0754-B490 #3000
    200V 4 pole 5.5/7.5 KW 1500/6000 rpm

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4781
    Downloads
    0
    Uploads
    0

    Default Re: fanuc motor

    I'm using a Automation Direct GS3 drive on mine, but any properly rated sensorless vector VFD will run the motor. But you will lose indexing capability if you use a VFD. And I would guess that a VFD would not be compatible with the Fanuc controls. I ripped everything that said Fanuc out of my machine, with the exception of the spindle motor.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member
    Join Date
    Nov 2006
    Location
    USA
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Re: fanuc motor

    did the same with my machine and also would like to keep the spindle motor but need indexing for tool changer



  4. #4
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4781
    Downloads
    0
    Uploads
    0

    Default Re: fanuc motor

    Quote Originally Posted by HANSENTECH View Post
    did the same with my machine and also would like to keep the spindle motor but need indexing for tool changer
    If not already equipped, you could install ''shot pin'' indexing on the spindle for tool changing.

    This would be a pin that enters a slot, pushed in by a small air cylinder. Rotate at very low speed, and kill the run signal to the VFD when the pin drops into the slot.

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

fanuc motor

fanuc motor

fanuc motor