Newbie Yaskawa SGDB-02VN with Mach3


Results 1 to 2 of 2

Thread: Yaskawa SGDB-02VN with Mach3

  1. #1
    Member averellan's Avatar
    Join Date
    Aug 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Yaskawa SGDB-02VN with Mach3

    Hello

    I am trying to get an old Biesse rover 23 running with mach3 and Smoothstepper Ethernet 51 I/O Motion controller. Looking in the manual, I have found a "connection and wiring" for Mitsubishi and I thought I could use this but with smoothstepper instead using pin an dir..

    I am stuck with the pinout from the SGDB-CANV, I can not find any manual, after days of looking, wich pins are what in the 13 pins jacket labaled 1CN.

    Any ideas?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Yaskawa SGDB-02VN with Mach3-screenhunter_1005-sep-03-23-07-jpg   Yaskawa SGDB-02VN with Mach3-screenhunter_1004-sep-03-23-06-jpg  


  2. #2
    Member dm17ry's Avatar
    Join Date
    May 2007
    Location
    1
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Yaskawa SGDB-02VN with Mach3

    SGDB-xxxN are early Mechatrolink-I drives. the bus gets connected to the blue 8-pin honda connector at the top left. 1CN circled in red is for limit switches and the like.
    the manual is available on the web, google for SIE-S800-26.4B. i doubt about mach3/SS...



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Yaskawa SGDB-02VN with Mach3

Yaskawa SGDB-02VN with Mach3

Yaskawa SGDB-02VN with Mach3