Originally Posted by
caripen
Hi there.
Thanks for the quick answers.
I cannot reverse cables 5 and 6, as they share ground (0v) with the +24 of terminal 47 and ground of terminal 1
When sending an (M3) or (M4) from mach3, the input changes terminal 43 state, the motor with (M5) stops as the voltage of 5 and 6 drops to zero.
Question? The SGDH drivers can reverse the direction of rotation keeping the same voltage on terminals 5 and 6, but modifying terminals 40-41-42-43 or some other terminal, and modifying the programming of the internal programmable switches of the SGDH