Alternative to Mitchell Electronics TI-5000


Results 1 to 13 of 13

Thread: Alternative to Mitchell Electronics TI-5000

  1. #1

    Default Alternative to Mitchell Electronics TI-5000

    Hi all I work at a repair shop and I'm looking to find an alternative for the mitchell TI-5000 encoder test system. The guys at mitchell have moved to a time based subscriber model (it used to be just a licence key and unlimited) and we don't see enough motors to get our moneys worth unfortunately we set up our shop after the switch over to subscription. Does anyone know of an alternative?

    Also on the same note I want to be able to run my motors. Mitchell provides the TI-3000 system to do this but again its subscription - I need a universal motor run system.

    Any thoughts?

    Similar Threads:


  2. #2

    Default Re: Alternative to Mitchell Electronics TI-5000

    Hi, did you find a alternativ for the equipment from Mitchell Electronics ?
    We are planning to build our own equipment !!!

    Regards from Denmark



  3. #3

    Default Re: Alternative to Mitchell Electronics TI-5000

    I haven't - did you end up building one?



  4. #4

    Default Re: Alternative to Mitchell Electronics TI-5000

    Yes, We are building one right now.
    We are using aS7-1500 and converting all signals to hall and then we are using a drive from AMC like mitchell.
    it is better you can them use TTL, Htl , resolver, Endat 2,1 - 2.2, hiperface and hiperface dsl, biss, drivecliq, mitsubishi, fanuc and etc.
    https://www.cnczone.com/forums/attac...d=458998&stc=1

    Attached Thumbnails Attached Thumbnails Alternative to Mitchell Electronics TI-5000-motordrift-1vpp-jpg  


  5. #5
    Member Henmen's Avatar
    Join Date
    Mar 2021
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Re: Alternative to Mitchell Electronics TI-5000

    That’s a great success well done ......and Can you email me the detail where and how to access or buy the software?
    Hennycorelectric@gmail.com
    Thanks for sharing us....



  6. #6
    Member carlosgamer8's Avatar
    Join Date
    Apr 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by elektromann View Post
    Yes, We are building one right now.
    We are using aS7-1500 and converting all signals to hall and then we are using a drive from AMC like mitchell.
    it is better you can them use TTL, Htl , resolver, Endat 2,1 - 2.2, hiperface and hiperface dsl, biss, drivecliq, mitsubishi, fanuc and etc.
    https://www.cnczone.com/forums/attac...d=458998&stc=1

    how does it work?
    replaces the Mitchell well?, Did you get it to work well?



  7. #7
    Member Maxi2's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Alternative to Mitchell Electronics TI-5000

    Hello elektromann,
    we need an alternative for the ti5000ex. Can you offer us your system ?
    How does it works ??
    Thank you



  8. #8
    Member Maxi2's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Alternative to Mitchell Electronics TI-5000

    Hello Together,
    i work in a repair shop and we depend on the Mitchell Box. Does anybody has an alternative solution ??

    Thanks for ideas, etc....

    Regards from Germany



  9. #9

    Default Re: Alternative to Mitchell Electronics TI-5000

    Hi again
    I will write in here when we are finish Building the test reg.
    So fare it looks promising :-) have a nice sommer :-)



  10. #10

    Default Re: Alternative to Mitchell Electronics TI-5000

    Hi Elektromann did you finish it? I have DM'd you but no reply. Maybe you could reach out. I think I can help

    Quote Originally Posted by elektromann View Post
    Hi again
    I will write in here when we are finish Building the test reg.
    So fare it looks promising :-) have a nice sommer :-)




  11. #11
    mpswitze's Avatar
    Join Date
    Jan 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Alternative to Mitchell Electronics TI-5000

    Curious has anyone used or heard of Octava Engineering before? Look to have similar repair equipment for servo motors.



  12. #12
    Member pulgagr's Avatar
    Join Date
    Oct 2022
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Alternative to Mitchell Electronics TI-5000

    I am also interested on this.



  13. #13
    Member FernandoRosette's Avatar
    Join Date
    Dec 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Alternative to Mitchell Electronics TI-5000

    Hi Elektromann did you finish it? Is there a way I can buy your system?

    Best regards,



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Alternative to Mitchell Electronics TI-5000

Alternative to Mitchell Electronics TI-5000