At 50Kg you may want to look at some kind of counter-balance.
Al.
hello just asking which servo is best for my z axis which weight around 50kg
i got 3 choice the price is same since it used
1KW Delta ECMA-EA1310SS 17 Bit Absolute <medium inertia
1Kw Delta ECMA-E11310SS 20 Bit Incremental <medium inertia
750W Delta ECMA-C1 20 bit Incremental
Similar Threads:
At 50Kg you may want to look at some kind of counter-balance.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Do not need gas strut. Any motor will be OK. For more smooth motion, a small lead or small motor with gearbox will be better.
I'd consider a spring to take up some of the weight, though. By not having the servo constantly fighting that weight, it'll use less power and run cooler.