Yaskawa YSC-SGMPH-08-001 suggestions for testing


Results 1 to 1 of 1

Thread: Yaskawa YSC-SGMPH-08-001 suggestions for testing

  1. #1
    Activation process cncneon's Avatar
    Join Date
    Aug 2018
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Yaskawa YSC-SGMPH-08-001 suggestions for testing

    New to the CNC world. Have converted HF bench mill to CNC and rebuilt a Techno ISEL gantry but those were steppers.
    In my travels I picked up a couple Yaskawa YSC-SGMPH-08-001 which appear to be about 1 hp 200V servos with a nice 20mm thru spindle.
    Would love to just hook them up to see if they even work before going any further but have no idea where to start. . . .
    Is that 200V ac or dc?
    Can I use Mach4 and what do I need as far as BOB, controller, PS, etc
    Thanks to all that contribute.
    cncneon

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Yaskawa YSC-SGMPH-08-001  suggestions for testing-img_20190830_101347-jpg   Yaskawa YSC-SGMPH-08-001  suggestions for testing-img_20190830_101326-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Yaskawa YSC-SGMPH-08-001  suggestions for testing

Yaskawa YSC-SGMPH-08-001  suggestions for testing

Yaskawa YSC-SGMPH-08-001  suggestions for testing