servo motor mechanical phasing


Results 1 to 2 of 2

Thread: servo motor mechanical phasing

  1. #1
    Member James-Ross's Avatar
    Join Date
    May 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default servo motor mechanical phasing

    Hi.

    I have a 1326AB servo motor and its resolver is out of tune.I have read somthing about mechanical aligning of servomotor feedbacks. Anybody Knows how is the procedure of mechanical manual phasing in Allen Bradley?
    Is that V+ W- and sine wave null? Or What?

    Regards
    James



  2. #2
    Member James-Ross's Avatar
    Join Date
    May 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    For your information here is what Kollmorgen manual on "AKM® Servo Motor Selection Guide" (page 54) states:

    "Resolver Alignment
    With positive DC current into phase W and out of phase V (U floats)
    the resolver is aligned to electrical ±5 counts. ie. Voltage S1-S3
    set to null voltage S2-S4 max in phase with reference (R1-R2)."

    Regards
    James



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

servo motor mechanical phasing

servo motor mechanical phasing

servo motor mechanical phasing