Indramat KDA 3.3-100-3-A00-W1

[dsrepaircnc]

Hello,

I have a problem with this drive. One of the power modules blow up, so we change all three, nstead of changing only one.

The power power board was repaired to.

At the end , the unit powers up, the faill led is off, the ready led is on, on the display appear ( N*NCMD ), and the motor don't run.

Can someone help with this.

Best regards

Similar Threads:

• Need Help!- indramat 3TRM2
• Problem- INDRAMAT KDA 3.2-150-3-A00-W1
• Need Help!- M-parametrs Indramat 2AD
• Indramat

[maws]

Hello,

I have a problem with this drive. One of the power modules blow up, so we change all three, nstead of changing only one.

The power power board was repaired to.

At the end , the unit powers up, the faill led is off, the ready led is on, on the display appear ( N*NCMD ), and the motor don't run.

Can someone help with this.

Best regards

Where you ever able to figuring this one out ? - I'm having the same trouble with N*NCMD and everything else seem to be in working order.....