Need Help! AEROTECH MT-3323-047H1E PM FIELD Servo Motor


Results 1 to 2 of 2

Thread: AEROTECH MT-3323-047H1E PM FIELD Servo Motor

  1. #1
    Registered
    Join Date
    Mar 2016
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default AEROTECH MT-3323-047H1E PM FIELD Servo Motor

    Would like to use this servo in my mach3 mill set up. Does anyone possibly have a data sheet or know how to get one. I have been trying to obtain information so that I can buy the correct driver and controller etc. but its seems to be non existent. Any help would be greatly appreciated. Thanks ! (see attachéd photos)

    Similar Threads:
    Attached Thumbnails Attached Thumbnails AEROTECH MT-3323-047H1E PM FIELD Servo Motor-servo015-jpg   AEROTECH MT-3323-047H1E PM FIELD Servo Motor-servo016-jpg  


  2. #2
    Registered
    Join Date
    Jun 2011
    Location
    US
    Posts
    534
    Downloads
    0
    Uploads
    0

    Default Re: AEROTECH MT-3323-047H1E PM FIELD Servo Motor

    From what I can see, it doesn't look like there's an encoder on those, just a tach, so they won't really work (without adding an encoder) with anything modern. I'd say your best bet is to try to sell them on Ebay and just get steppers if you're on a budget.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

AEROTECH MT-3323-047H1E PM FIELD Servo Motor

AEROTECH MT-3323-047H1E PM FIELD Servo Motor