Yaskawa servo motors and drives Controller help

[bajlekov]

Hello,
I am exploring the opportunity to use Yaskawa Servo motors and drives to use for a 5 axis CNC router. Currently I am planning to use these servos. What controller board can I use to power them? I will need to buy additionaly 3 motors. Is it possible to use other brand of motors and drives in combination with the Yaskawa? Any help will be very very appreciated.

Best regards,
Peter

https://www.cnczone.com/forums/attac...d=393208&stc=1https://www.cnczone.com/forums/attac...d=393210&stc=1https://www.cnczone.com/forums/attac...d=393212&stc=1https://www.cnczone.com/forums/attac...d=393214&stc=1https://www.cnczone.com/forums/attac...d=393216&stc=1https://www.cnczone.com/forums/attac...d=393218&stc=1

Similar Threads:

• Need Help!- How to use autotune for yaskawa servo drives in slaved configuration
• Need Help!- Yaskawa drives and motors
• Problem- Swapped x and y yaskawa motors and drives, do I need to reset perimeters?
• Help with Yaskawa SGDM-04ADA-V ac servo drives
• Need Help!- yaskawa SGDA-08AS SERVO DRIVES