I have 3 servo drives EP1C of Maxine and MESA board 7i92+7i76.
Board was configured successfully and I checked it on stepper drive. It generates pulses fine.

But my main aim is to run servo drives with help of this board. This drives was testet on GSK 92 CNC control system they are run.

My main problem is that this servo drive EP1C doesn't see input pulses of step/dir signals. I settled timing of this pulses rather big - 10000ns to react. It’s few times greater than needed.
Also I have on input DI1=true - as SON enabling work input. Limit switches CCWL and CWL are disabled and they are not cause any problem.
I’ve settled position operation (P004=0) and step/dir type of operation (P035=0). I settled the servo to default condition now but nothing. Does any body know what problem could be?

Similar Threads: