I should have said that I need to control analogue AC servo drivers - so not sure if the UHU controller is suitable at all.
I need an step/dir to +/-10v servo controller. I came across this Homepage Huber which looks like an economical solution to the problem. However, while I have a basic grasp of electronics and can knock-up a power supply, I'm not capable of tackling a project like this without assistance.
I wasn't able to find a a simple circuit diagram and a component list on the site - basically I need idiot-kit instructions. Has anyone on here built one? Any help very much appreciated.
David
Similar Threads:
I should have said that I need to control analogue AC servo drivers - so not sure if the UHU controller is suitable at all.
The UHU controllers that were being built several years ago were for DC brushed motors. I don't think they will work with AC motors.
Sorry.
Bill
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Thanks for setting me right Bill.
I've built several UHU servo controllers. They are for brushed motors.
This may be of help. Try contacting them for assistance.
Step2Linear, ViperServo