aze-cc4q servo drive connections


Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: aze-cc4q servo drive connections

  1. #1
    Registered
    Join Date
    Mar 2008
    Location
    canada
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default aze-cc4q servo drive connections

    aze-cc4q servo drive connections-dsc_0023-1-jpgaze-cc4q servo drive connections-dsc_0024-jpg

    Im trying to identify all the connections on the vicker servo drive, I cant locate a manual for it so if any one with knowledge of these, could you please chime in so I can get this electrical figured out.
    Thank you
    Wade

    Similar Threads:


  2. #2

    Default Re: aze-cc4q servo drive connections

    I have Manual for Servodriver Aze CC4Q, I need help of PLC for Morbidelli U 46.



  3. #3
    Registered
    Join Date
    Apr 2008
    Location
    Serbia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Hello, Is there any possibility to send me on my email manual for AZE-CC4Q, I am having problem finding it on net. My mail is: ljradojko@gmail.com . Thank you.



  4. #4

    Default Re: aze-cc4q servo drive connections

    I am making party at now. I will send if i have time scanned version, if not, i will make pictures via camera. No scanned them, on paper at the moment. No scanner...



  5. #5
    Registered
    Join Date
    Apr 2008
    Location
    Serbia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Hello, enjoy the party. I appreciate your help, thank you. Take easier way, I can OCR doc myself and send you PDF copy.



  6. #6

    Default Re: aze-cc4q servo drive connections

    Here is it for public because one guy from here helped me out with PLC: AZE CC4Q Manual Phone Picture version 1.01.
    I hope it works as it should. I have no scanner, so I made fast working solution.
    http://www.piduline.ee/upload/AZECC4Q.rar
    Password: Piduline.ee

    (If error non-user with link: wwwDOTpidulineDOTee/upload/AZECC4Q.rar PSW: PidulineDOTee)

    I own Morbidelli U 46 COMPLETE MANUAL, Tria 6000, spares, service and so on...



  7. #7
    Registered
    Join Date
    Apr 2008
    Location
    Serbia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Thank you very much. I download it and review without any problems. After I run it through OCR I can send you PDF copy if you want.



  8. #8

    Default Re: aze-cc4q servo drive connections

    Hy, I don't want it back, I can do it older way - I read from paper
    Unfortunately, i added no Viruses to rar.
    One day i will scan these correctly.



  9. #9

    Default Re: aze-cc4q servo drive connections

    All paperworks scanned, here is AZE files public: Piduline.ee



  10. #10
    Member
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Are the AZE-cc4q drives controlled with +-10 ? If not, what is the input from controller? I cannot read Itailian...lol



  11. #11
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Newbie to the CNC world here for the first time... I had a good friend donate a Morbidelli U15 to me. Just got it moved in a couple days ago. Just like others on this thread I'm working with the Elge AZE-CC4Q servo drives for the original servo motors. I'm planning on converting this all over to Mach3 control and am trying to wire the controls up to the servo drives. I see that a few of you all had the manuals for these drives... but it looks like the links are not working any longer. Any help is super appreciated! I am planning on documenting this process as I go and then posting the whole process once it is wrapped up.



  12. #12
    Member
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Quote Originally Posted by mchico33 View Post
    Newbie to the CNC world here for the first time... I had a good friend donate a Morbidelli U15 to me. Just got it moved in a couple days ago. Just like others on this thread I'm working with the Elge AZE-CC4Q servo drives for the original servo motors. I'm planning on converting this all over to Mach3 control and am trying to wire the controls up to the servo drives. I see that a few of you all had the manuals for these drives... but it looks like the links are not working any longer. Any help is super appreciated! I am planning on documenting this process as I go and then posting the whole process once it is wrapped up.

    I got them running on a friends machine. They use +-10v. They work well. You would need some kind of board with Mach3 that can do +-10v.

    Just my 2 cents.



  13. #13
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Bevins, thanks for the info! That is encouraging to hear that they worked well.

    I will definitely purchase a Mach3 controller board with the +-10v. That is great advice.

    I am still struggling to figure out what connects to what with the outputs of the servo drive terminals. Would you happen to have any thoughts on where I could find that info? Or a manual for this servo drive card?

    Thanks again for the great guidance! I'm really excited to get my first CNC table up and running! Thanks for all the help!!!



  14. #14
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hi all,

    Kind of a desperate plea for a manual or any further info on wiring this up. I’ve got this amazing machine sitting idle in my shop because I am afraid to wire up these servos wrong and make a very costly mistake. I’ve reached out to a couple repair companies and to Vickers and haven’t had any luck.

    Do these run on 220v three phase? It came with three transformers and three resistors. Though I’m not sure how to wire it all up.

    Does anybody have a manual that could be emailed? I am very grateful for all the helpful guidance!

    Mchico33@gmail.com



  15. #15
    Registered
    Join Date
    Feb 2018
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Quote Originally Posted by kauposaarva View Post
    All paperworks scanned, here is AZE files public: Piduline.ee
    I know this thread has been cold for a long while, but I'm rebuilding an old Morbidelli U15 and converting it over to Mach3 control. It still has the three AZE drives for the DC servo motors. I'm working to get them wired up on the bench for testing and to get them running with a new Mach3 controller. When I went to the link in this post the files were no longer there.

    I know it has been a long time since you've posted this, but if you still have the files, would you be so kind as to email them to me? I am having a heck of a time finding info on how to wire these drives up and any help is very very appreciated.



  16. #16
    *Registered User* richizer's Avatar
    Join Date
    Jun 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    hello my friend. I need the manual for servodriver Aze CC4Q. I'm repair a mainboard

    thanks



  17. #17
    Member
    Join Date
    Nov 2017
    Location
    Germany
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hello,
    I have them on my machine too. I have some pictures of the manual but not the hole manual. My drive has the Fault LED on and the Darligton-Trans of the H-Bridge are gone. I do not find the Mistake.
    Perhaps has anyone an Idea.
    thanks in advance



  18. #18
    Member
    Join Date
    Sep 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    Hi all,
    I have just purchased an old Morbidelli U13, and I am going to convert it to Mach3 using Kflop and Kanalog.
    I have not yet found much info regarding the Vickers AZE R3/E servo drive that is inside the cabinet, but I will post any information I can find!

    Best regards
    Asle from Norway



  19. #19
    Member
    Join Date
    Sep 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    I have the manual, I picked up my new (new to me, it was made in 1991) Morbidelli U13 with Vickers AZE servo drives. If you still need the manual, then give me a shout, I have scanned them into pdf's :-)

    Best regards
    Asle, Norway



  20. #20
    Member sandeep2734's Avatar
    Join Date
    Mar 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: aze-cc4q servo drive connections

    AsErBo
    Please send me the manual for Vickers AZE-CC4Q HV06/A0-R - 200/6/ DC Servo drive.
    My email is : technoserve.kpt@gmail.com
    Thanks



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

aze-cc4q servo drive connections

aze-cc4q servo drive connections

aze-cc4q servo drive connections