aze-cc4q servo drive connections

[Bobi92]

Hi @ all,

I know the last Post was two years ago but I hope that some of you can help me.
In my shop I had a Bridgeport MDI Series 1, the machine had three DC-servos but only one servo driver.
That means you only can drive one axis at the same time.

That´s the reason of my retrofit of this machine. For the retrofit I sold a rack from El.Ge with three driver cards who is called AZM R4/A-H.
I know the type is a bit different to the post before, but I´ve no information about this rack.
I need to know how I have to wire this rack, I think the essentially pins are similar to other types of El.Ge or Vickers.

I will control the driver with linux CNC, but that will be the next step.

It will be very nice when I can get a manual, a circuit diagram or something else from machines with this cards like Morbidelli U13 or Sharnoa SDC 20 / 80 for example.
So i can make it similar on my machine, in hope that it work.

Every informaion can be really important for me.

Thanks for your help in andvance

Best regards

Marco

[sandeep2734]

AsErBo
Please send me the manual for Vickers AZE-CC4Q HV06/A0-R - 200/6/ DC Servo drive.
My email is : technoserve.kpt@gmail.com
Thanks

[harrimansat]

Can you please sendme a manual copy to harrimansat@hotmail.com ?

[kauposaarva]

Link active again!

http://www.piduline.ee/upload/AZECC4Q.rar
Password: Piduline.ee

(If error non-user with link: wwwDOTpidulineDOTee/upload/AZECC4Q.rar PSW: PidulineDOTee)

[terans]

Hello, apologies to revive an old thread (again) but a buddy of mine came across an SCM machine with these drives and I am helping to revive. The link for the manuals appears to be dead, would anyone be kind to share in any way? Thank you for the help

[AsErBo]

Hello, apologies to revive an old thread (again) but a buddy of mine came across an SCM machine with these drives and I am helping to revive. The link for the manuals appears to be dead, would anyone be kind to share in any way? Thank you for the help

Have a look here: https://www.dropbox.com/sh/t4h7bvida...Msenr_25a?dl=0

[kauposaarva]

Hello, apologies to revive an old thread (again) but a buddy of mine came across an SCM machine with these drives and I am helping to revive. The link for the manuals appears to be dead, would anyone be kind to share in any way? Thank you for the help

Link works but probably need copy paste in Chrome or smthng