Some drives can run brushed and brushless, but generally i would say most dont.
Originally Posted by max_imum2000
can they ?
any restrictions ?
what about the 3 phase brushless drive, can they be used as well ?
Similar Threads:
Some drives can run brushed and brushless, but generally i would say most dont.
Originally Posted by max_imum2000
There are a few manufacturers that state this in their spec. for example you can do this on Aerotech, Copley Controls and A-M-C amp for just a few.
These are Brushless DC 4 quadrant PWM drives and generally you place the commution setting to 60° and use the U V phases, I have used the above drives in this manner and they work fine.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.