Sanyo PY0/PY2 Tuning Software - Page 3


Page 3 of 3 FirstFirst 123
Results 41 to 47 of 47

Thread: Sanyo PY0/PY2 Tuning Software

  1. #41
    Member darkoford's Avatar
    Join Date
    Sep 2010
    Location
    Croatia
    Posts
    26
    Downloads
    5
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    Does anyone have a serial cable PIN diagram?
    Thank



  2. #42
    luisvidigal's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    You can find the software manual here, and on page 41 is the cable PIN diagram: https://manualzz.com/doc/26762500/us...---sanyo-denki

    Attached Thumbnails Attached Thumbnails Sanyo PY0/PY2 Tuning Software-op-pinout-jpg  


  3. #43
    Member darkoford's Avatar
    Join Date
    Sep 2010
    Location
    Croatia
    Posts
    26
    Downloads
    5
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by luisvidigal View Post
    You can find the software manual here, and on page 41 is the cable PIN diagram: https://manualzz.com/doc/26762500/us...---sanyo-denki
    Thank you.
    Maybe you have a diagram of encoder cable (PY2 - P5 motors)?



  4. #44
    luisvidigal's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by darkoford View Post
    Thank you.
    Maybe you have a diagram of encoder cable (PY2 - P5 motors)?
    Not sure if this is what you need but check this out. Did you manage to connect with the driver with the software? I am still trying to connect with the driver. Spent the hole day today but no luck. I have the software installed in a virtual machine winXP 32, do you know if is possible to communicate with the driver while using the virtual machine, or I need a PC running native winXP? regards

    Attached Thumbnails Attached Thumbnails Sanyo PY0/PY2 Tuning Software-encoder-connection-diagram-jpg  


  5. #45
    Member darkoford's Avatar
    Join Date
    Sep 2010
    Location
    Croatia
    Posts
    26
    Downloads
    5
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    I need the correct wire layout for encoder PY2 -> P5. so I can test the correctness because it shows me the encoder error flashing "8".
    The machine on which the equipment was used was WIN NT 2000.
    I haven't connected the amplifier to the PC yet because I don't have a connector. Maybe connect directly in the coming days.

    Btw. Unable to open file (last). If you can email darkoford@gmail.com Thanks

    Attached Thumbnails Attached Thumbnails Sanyo PY0/PY2 Tuning Software-screen-shot-07-24-20-04-53-a  


  6. #46
    Member JLLO98's Avatar
    Join Date
    May 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by heathmanc View Post
    I've had a couple people ask for this software, so I've decided to attach it here.

    Charles
    hi charles i tried to install this software on w10 but i have a trouble trying to install it on my PC, i have a message that told me is not a version for my computer, i tried disable the smartscreen and install with compatibility of WXP SP3 but i got always the same truoble, some idea for solution this problem?

    thanks.



  7. #47
    Member anusbilal's Avatar
    Join Date
    Dec 2022
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    hy sir can you send me the connection diagram of this cable or connection image
    i shall be thankful to you



  8. #48
    Member javtan's Avatar
    Join Date
    Dec 2022
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    Quote Originally Posted by heathmanc View Post
    I've had a couple people ask for this software, so I've decided to attach it here.

    Charles
    I have an issue running the setup. "This app can't run on your pc"



  9. #49
    Calde's Avatar
    Join Date
    May 2023
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Sanyo PY0/PY2 Tuning Software

    Precisó este software



Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sanyo PY0/PY2 Tuning Software

Sanyo PY0/PY2 Tuning Software