Motor encoder alignment - Page 2

Page 2 of 2 FirstFirst 12
Results 13 to 15 of 15

Thread: Motor encoder alignment

  1. #13
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    22916
    Downloads
    0
    Uploads
    0

    Default Re: Motor encoder alignment

    Quote Originally Posted by Azalin View Post
    By magnetic I mean the encoder has no rotating part, it just senses the rotation of a magnet.

    This one: https://www.rls.si/en/rmc22-commutat...mental-encoder
    I see, I believe I tried a similar version made by CUI but it was in the early stages of development and I had varying degrees of success with it.
    Those look similar, if so they are self calibrating, i.e. requires no scope to align.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  2. #14
    Registered Azalin's Avatar
    Join Date
    Mar 2014
    Location
    Turkey
    Posts
    870
    Downloads
    0
    Uploads
    0

    Default Re: Motor encoder alignment

    Yes. Just align the rotor to the zero point and set the encoder with a button.

    What I don't know is how to get the rotor to it's zero point. I came across a blog entry today. The poster says if you apply +5vdv to the U phase and - pole to the V phase then the rotor will move to the zero point. Sounded interesting to me.

    Sent from my MI 5s Plus using Tapatalk

    Suat
    Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby


  3. #15
    Registered
    Join Date
    Apr 2015
    Posts
    123
    Downloads
    0
    Uploads
    0

    Default Re: Motor encoder alignment

    Quote Originally Posted by Al_The_Man View Post
    There are many encoders made this way now as Hall sensors have dropped out of favor now because the simulated hall tracks are much more accurate.
    I used to get mine from Renco, but now they have been taken over by Heidenhain, many of the models have been dropped. But there are many others.
    I have converted Fanuc AC servo motors to BLDC this way.
    You need to know the pole count of the motor, if you short the stator leads and rotate the motor by hand and count the 'bumps' per rev.
    AZALIN, I have never come across a 'Magnetic' encoder as far as I recall.
    Al..
    Thanks for that Al, I will have a look round and see what is available in the UK. Dave



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Motor encoder alignment

Motor encoder alignment