Need Help! need photo PCB Parker GV driver

Results 1 to 6 of 6

Thread: need photo PCB Parker GV driver

  1. #1
    Registered
    Join Date
    Jan 2012
    Location
    Russia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Unhappy need photo PCB Parker GV driver

    Hello!
    I have 3 Parker GV6 controller, but its bad controller for CNC (not have step-dir input), if you have Parker GV controller, i need photo up PCB (may be i can downgrade GV6 to GV).

    Thanks and sorry for my bed english.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2012
    Location
    Russia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    up theme please any body help



  3. #3
    Registered
    Join Date
    Nov 2006
    Location
    belgium
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I have the same problem you need gv drives not gv6, you can ask by parker if it's possible to downgrade them.
    I don't think so, problem is the software(bios of the drive)



  4. #4
    Registered
    Join Date
    Jan 2012
    Location
    Russia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by flanny View Post
    I have the same problem you need gv drives not gv6, you can ask by parker if it's possible to downgrade them.
    I don't think so, problem is the software(bios of the drive)
    hm... Im resolv problem connect input +/- 10 V, and write programm.



  5. #5
    Registered
    Join Date
    Nov 2006
    Location
    belgium
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    let me know how you do this



  6. #6
    Registered
    Join Date
    Jan 2012
    Location
    Russia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    ok.
    you have in GV6 input to analog signal (+/-10V).
    you need converter step-dir to (+/-10V) and write small programm to GV6 (i not remember programm, sorry - but tommorow i can remeber this)

    Quote Originally Posted by flanny View Post
    let me know how you do this




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need photo PCB Parker GV driver

need photo PCB Parker GV driver