Hi all , I have this goodway GTS150 which developed a problem of random shut downs to a black screen , then it would power on again on its own , it has now developed into a no power on situation , there is 24 vdc at the nc power on button but when I press on I get the KA32 relay on the I/O board clicking rapidly and no power on , the drives are all lit up , the 24 v power supply voltage also drops when I press the power on button , any help would be much appreciated . I'm thinking maybe a short on the 24v system somewhere ?
Similar Threads:
- Black screen on 8040T
- Display screen goes black
- Need Help!- Goodway Lathe Coolant Pump
- ras2vec black screen
- Need Help!- Black screen
Last edited by moss99; 04-23-2022 at 04:00 PM.
I found the issue , it was the head 2 ejector sensor wire had rubbed through and was shorting on a braided oil pipe,Hi all , I have this goodway GTS150 which developed a problem of random shut downs to a black screen , then it would power on again on its own , it has now developed into a no power on situation , there is 24 vdc at the nc power on button but when I press on I get the KA32 relay on the I/O board clicking rapidly and no power on , the drives are all lit up , the 24 v power supply voltage also drops when I press the power on button , any help would be much appreciated . I'm thinking maybe a short on the 24v system somewhere ?