- Allen-Bradley 9/260 will not clear E-stop
-
Member
Allen-Bradley 9/260 will not clear E-stop
I have a Canton Industrial Systems 5 axis router that will not clear E-stop. There is no message with the E-stop. I have checked the E-stop circuit and it appears OK. Had an axis home switch go bad and replaced it. The controller is an Allen-Bradley 9/260. Any help would be appreciated.
Similar Threads:
-
- Allen-Bradley 9/260 will not clear E-stop
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules