Fadal VMC 4020 electrical problem

Results 1 to 2 of 2

Thread: Fadal VMC 4020 electrical problem

  1. #1
    sandegj's Avatar
    Join Date
    Jul 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Question Fadal VMC 4020 electrical problem

    Hello all you CNC brains out there, I working on a Fadal VMC 4020 and the problem is that it was working fine one day and the next it wouldn't respond to any keyboard entries. The environment isn't the best, temperature of the shop was in the upper 80's and high humidity. This is what I can tell you, the 1550 board slot1, temp controller board has the bottom lite on, the 1420 video board, slot 7 has a blinking light and slot 8,9,10 and 13 axis controllers have blinking lights. The X,Y and Z driver boards, no lights. the power supply has +5, +12 and -5 volts d.c. "shows no sign of a.c. ripple" Sorry to bug you guys, but I haven't worked on this machine since 2009 and forgot most of what I knew about it. the video information, and I did foul the memory checking for dirty connectors around the memory chips. I have backups for the programs that were in memory. Jerry

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: Fadal VMC 4020 electrical problem

    ...possible one of the Keys are stuck down.
    DJ



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fadal VMC 4020 electrical problem

Fadal VMC 4020 electrical problem