ikegai Tur 25 spindle

Results 1 to 2 of 2

Thread: ikegai Tur 25 spindle

  1. #1
    Member
    Join Date
    Apr 2003
    Location
    USA
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default ikegai Tur 25 spindle

    hi guys i am looking at a Ikegai TUR25 everything works but spindle will not start
    i am not near the machine anybody got any ideas ?
    the gentleman said spindle was running but now wont start
    Help
    should i walk ?

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2006
    Location
    MEXICO
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default Re: ikegai Tur 25 spindle

    Hello Ernie, Did you get your machine running ? Maybe I can help. I am looking at TUR15 with a Fanuc OT Model B. I am looking for the electrical diagrams. I just started
    going thru the machine and the spindle also will not turn on. In fact the cycle start does not show up on the diagnostic screen. You have a TUR 25 and I have a TUR15.
    Should have the same electrical drawings.
    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ikegai Tur  25 spindle

ikegai Tur  25 spindle

ikegai Tur  25 spindle