Open the probing screen in MachScreen screen designer, and you can get the OEM codes by clicking on each item.
I am looking at the code for the probing macros but I can't identify the DRO and LED id numbers. The main 2010 user manual only references the main screen, not the probing wizard screen.
I have no idea where the source code for the 2010 screen set is available where I can perhaps find the id numbers.
thanks
(oops, I mean the XY probing wizard that will do pockets)
Similar Threads:
Open the probing screen in MachScreen screen designer, and you can get the OEM codes by clicking on each item.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)