New Machine Build Trying to diagnose an issue with Mach3 post processor in FeatureCAM


Results 1 to 9 of 9

Thread: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

  1. #1
    Registered 154james's Avatar
    Join Date
    Apr 2015
    Location
    PA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Question Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    Hi guys,

    The NC code runs fine in featurecam under simulation but when I load it up in Mach 3 It just appears all wrong.

    I attached the NC code for the test part, my post processor and the differing pictures. It does appear to only happen when trying to 3D mill, can you guys help me sort this issue out?



    Thanks for all the help!

    Trying to diagnose an issue with Mach3 post processor in FeatureCAM-mkmbtbr-pngTrying to diagnose an issue with Mach3 post processor in FeatureCAM-cb63lmv-png

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    154james

    This is just something to check that you I&J in your General Configuration File looks like this photo

    Attached Thumbnails Attached Thumbnails Trying to diagnose an issue with Mach3 post processor in FeatureCAM-j-settings-png  
    Mactec54


  3. #3
    Registered 154james's Avatar
    Join Date
    Apr 2015
    Location
    PA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    Just pulled open my settings and they were defaulted with the IJ mode on Inc





  4. #4
    Gold Member daniellyall's Avatar
    Join Date
    Sep 2009
    Location
    New Zealand
    Posts
    1856
    Downloads
    3
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    you code has K in it what is Z axis offset for arcs is that meant to be there

    <img src="https://ivxo1q-dm2305.files.1drv.com/y4mENMmTr_Cabc7pR0FUdB6gtbADq2JbuG4_rGy0eBQvLJx19pTi6TqMUIJN0xgOyDIc0gWoxYhS38HpbSTFGdfaK-o42IOU6jczrhDpfpCOTNGL1X6hvZCbgj0y35gqmq1YGTrWwShYGV-C7lXA2esy0Pi_WfnBSyroDLSGXwce4uSr1U7op7srdi78rispHCa_K4aFlTlJPVkkNWMfgh_Tg?width=60&height=60&cropmode=none" width="60" height="60" />

    Being Disabled is OK CNC is For fuN


  5. #5
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    Quote Originally Posted by 154james View Post
    Just pulled open my settings and they were defaulted with the IJ mode on Inc

    Make sure they match your FeatureCAM settings.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  6. #6
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    154james

    I ran your program, and it seems to be quite messed up, in more ways than one,the Z axes movements have not been programed correct, taking the tool to Z.0 after every move, needs to be looked at, the way it looks in Mach3 is from the code, some of the circles you see are sphere shapes, this is from how the code has been posted

    Mactec54


  7. #7
    Registered 154james's Avatar
    Join Date
    Apr 2015
    Location
    PA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    Quote Originally Posted by ger21 View Post
    Make sure they match your FeatureCAM settings.
    Quote Originally Posted by daniellyall View Post
    you code has K in it what is Z axis offset for arcs is that meant to be there
    Quote Originally Posted by mactec54 View Post
    154james

    I ran your program, and it seems to be quite messed up, in more ways than one,the Z axes movements have not been programed correct, taking the tool to Z.0 after every move, needs to be looked at, the way it looks in Mach3 is from the code, some of the circles you see are sphere shapes, this is from how the code has been posted
    Thanks for taking a look and I know I got some issues with the z axis going to 0 every move. I was kind of just dealing with that until I got the rest of the issues sorted. I'm not sure how to fix the post from featurecam to make it any better being as I'm relatively new to CNC and CAM. Everything plays correctly in featurecam and looks alright there, I even tried matching the settings in featurecam to mach3 and had no luck with finding the IJ mode setting either. I could Show you on Skype if you didn't mind.



  8. #8
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    Quote Originally Posted by 154james View Post
    no luck with finding the IJ mode setting either.
    I tried it with every I &J combination, plus absolute & incremental, nothing made any difference, so it points to something wrong in your drawing, or the post processor, parts of the finishing program ran how it should

    Check your drawing for construction problems, it does point to this, as part of your program is working ok, I don't use featurecam so can't help you with that, check with your featurecam reseller for help

    Mactec54


  9. #9
    Member
    Join Date
    Jul 2017
    Location
    United States
    Posts
    347
    Downloads
    0
    Uploads
    0

    Default Re: Trying to diagnose an issue with Mach3 post processor in FeatureCAM

    Does anyone have a mach3 post processor for featurecam?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trying to diagnose an issue with Mach3 post processor in FeatureCAM

Trying to diagnose an issue with Mach3 post processor in FeatureCAM