Mastercam x4 and mach3 post processor and mmd


Results 1 to 2 of 2

Thread: Mastercam x4 and mach3 post processor and mmd

  1. #1
    Registered
    Join Date
    Jan 2014
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Mastercam x4 and mach3 post processor and mmd

    aloha,i am a newbie from hawaii and im stumped on how to install/configure the post processors from mastercam to my mach3 router.. i did copy the post processor thats on the mach3 site, but there is no mmd to go along with it. there probably is a post and answer within this forum but its way too big to scan thru every post. thanks in advance.

    machine: ox (rotozip router) 3 axis stepper (slaved y)
    controller : geckodrive g540 w/mach 3
    computer & os: dell 32bit xp

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2013
    Location
    USA
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam x4 and mach3 post processor and mmd

    Quote Originally Posted by 808knzbleu View Post
    aloha,i am a newbie from hawaii and im stumped on how to install/configure the post processors from mastercam to my mach3 router.. i did copy the post processor thats on the mach3 site, but there is no mmd to go along with it. there probably is a post and answer within this forum but its way too big to scan thru every post. thanks in advance.

    machine: ox (rotozip router) 3 axis stepper (slaved y)
    controller : geckodrive g540 w/mach 3
    computer & os: dell 32bit xp
    Hi did you ever find the mmd file, Im in the same boat, Hope you can help me out, Thank you.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mastercam x4 and mach3 post processor and mmd

Mastercam x4 and mach3 post processor and mmd