Need Help! Problem MPC6515


Results 1 to 2 of 2

Thread: Problem MPC6515

  1. #1
    Registered
    Join Date
    Feb 2011
    Location
    Brazil
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Problem MPC6515

    Hello, I'm having some problems with the MPC6515 board that she is out to make a cut when I cut / engrave and test to recognize the area. The machine simply does nothing. I noticed that the lights D1 to D8 are all on. What can be? I've tried re-send the firmware and settings, but nothing worked.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2011
    Location
    Brazil
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    waiting for reply!!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem MPC6515

Problem MPC6515