Donek Drag Knife/ gcode Swivel Program???


Results 1 to 2 of 2

Thread: Donek Drag Knife/ gcode Swivel Program???

  1. #1
    *Registered User* LamdeckZack's Avatar
    Join Date
    Sep 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Cool Donek Drag Knife/ gcode Swivel Program???

    So I'm familiar with RhinoCAM and creating basic flat mill tools but nothing like this. I want to create a tool for the Donek Drag knife. They have a gcode swivel program for the knife, how do I incorporate that and make a tool for this knife on Rhinocam. I have the "Donek D2 Knife" and I'm using Rhino 5. Ill attach the gcode program that Donek provides. If anyone can help me out on getting this to work I would very much appreciate it. Thank you!

    Heres their website where the gcode Swivel program is: http://donektools.com/free-cnc-router-software/links-2/



  2. #2
    Member
    Join Date
    Jan 2006
    Location
    Canada
    Posts
    68
    Downloads
    6
    Uploads
    0

    Default Re: Donek Drag Knife/ gcode Swivel Program???

    If I remember right, you create the toolpath in RC like normal, then open it in the swivel program and it automatically adds the swivels to the corners where needed. I tried it a while ago and was impressed. I cut gaskets and am not concerned about perfect square corners so don't use the swivel program. I just program an engraving tool path with RhinoCam, no lead ins or outs, and edit it in notepad to remove the M3/5's etc. works great.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Donek Drag Knife/ gcode Swivel Program???

Donek Drag Knife/ gcode Swivel Program???

Donek Drag Knife/ gcode Swivel Program???