Kink to Knot conversion


Results 1 to 5 of 5

Thread: Kink to Knot conversion

  1. #1
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Kink to Knot conversion



  2. #2
    Member TedKyte's Avatar
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Re: Kink to Knot conversion

    Can you not just fillet the curve?

    Ted
    http://www.RhinoCanada.com or http://www.ted-kyte.com


  3. #3
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: Kink to Knot conversion

    No - i need point editing.



  4. #4
    Member
    Join Date
    Feb 2006
    Location
    Norway
    Posts
    174
    Downloads
    0
    Uploads
    0

    Default Re: Kink to Knot conversion

    I would probably rebuild the curve.



  5. #5
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: Kink to Knot conversion

    Not good idea, LN-JET.
    First bad thing is i cannot rebuild selected curve points - command not applicable to selection, only to whole object.
    Second bad thing - result will be single segment curve. I cannot explode it further.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kink to Knot conversion

Kink to Knot conversion