Problem


Results 1 to 5 of 5

Thread: Problem

  1. #1


  2. #2
    Registered
    Join Date
    Jan 2008
    Location
    Canada
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Problem

    Hi Masoudex,

    I would make this using a sweep 2 rails command.
    Make open vectors to follow the curvature in the Y axis (according to the photo positioning), then make a few profiles in the X axis. Run those as a two rail sweep,

    More views of the leg would be better, isometric preferred. You probably need to make this in a few parts then surface blend them together and join.

    Let me know if you need more assistance on this. If you do, I'll need to see an isometric drawing so that we get all views related to this shape.

    Cheers,
    Bruce



  3. #3
    Registered
    Join Date
    Sep 2017
    Location
    Iran, Islamic Republic Of
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Problem

    Quote Originally Posted by asbestosfriend View Post
    Hi Masoudex,

    I would make this using a sweep 2 rails command.
    Make open vectors to follow the curvature in the Y axis (according to the photo positioning), then make a few profiles in the X axis. Run those as a two rail sweep,

    More views of the leg would be better, isometric preferred. You probably need to make this in a few parts then surface blend them together and join.

    Let me know if you need more assistance on this. If you do, I'll need to see an isometric drawing so that we get all views related to this shape.

    Cheers,
    Bruce

    Thanks Bruce. I will do what you said and tell the result.



  4. #4
    Member
    Join Date
    Mar 2010
    Location
    Russia
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Re: Problem

    I made similar looking legs.
    Problem-noga-260v1-9-jpg
    Problem-noga-260v1-10-jpg
    This one was created by 2rail sweep, then surfaces was joined.
    3 rails, about 6 profiles.
    But yours a bit complex. I never made forms like this, but this one uses same algorythm:
    Problem-carga5-jpg
    Lower front part of this leg was made by curve network, all other with 2rail sweep.
    It's simple.



  5. #5
    Registered
    Join Date
    Sep 2017
    Location
    Iran, Islamic Republic Of
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Problem

    Quote Originally Posted by Melkiades View Post
    I made similar looking legs.
    http://www.cnczone.com/forums/attach...d=374648&stc=1
    http://www.cnczone.com/forums/attach...d=374650&stc=1
    This one was created by 2rail sweep, then surfaces was joined.
    3 rails, about 6 profiles.
    But yours a bit complex. I never made forms like this, but this one uses same algorythm:
    http://www.cnczone.com/forums/attach...d=374652&stc=1
    Lower front part of this leg was made by curve network, all other with 2rail sweep.
    It's simple.
    Thanks dear @melkiades.




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem

Problem