How to close this geometry?


Results 1 to 3 of 3

Thread: How to close this geometry?

  1. #1
    Registered
    Join Date
    Dec 2015
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default How to close this geometry?

    Hello

    Can you guys please help me closing this geometry?

    I have tried to sweep the horizontal curve with the vertical curve (marked red arrow) but it doesn't close - or makes it smooth.

    What to do? :-) It's really appreciated.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails How to close this geometry?-3465346456-jpg  


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    USA
    Posts
    682
    Downloads
    0
    Uploads
    0

    Default Re: How to close this geometry?

    Place a point at the intersection of the guide curves you are trying to use and use the loft command. Chose the point and the open surface as your sections. Then tweak your ratios as required.



  3. #3
    Member
    Join Date
    Mar 2006
    Location
    USA
    Posts
    81
    Downloads
    0
    Uploads
    0

    Default Re: How to close this geometry?

    You can also use the Dupedge (Duplicate Edges) command to create a curve for that open edge if you don't have it.
    Split the resulting curve vertically using that vertical staple-looking line.

    Then, use the CrvNetwork (Network Curve) command and select the three vertical lines, then the cross-section horizontal line, and it'll create a nice open surface that should match the tangency of the one you've got, there.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to close this geometry?

How to close this geometry?