How do you create the transition from heel to neck on a guitar neck?


Results 1 to 6 of 6

Thread: How do you create the transition from heel to neck on a guitar neck?

  1. #1
    Registered
    Join Date
    Feb 2012
    Location
    usa
    Posts
    83
    Downloads
    0
    Uploads
    0

    Default How do you create the transition from heel to neck on a guitar neck?

    Hi All,

    Can someone explain how to create the contour that goes from the heel to the necK?

    If you look at the second picture on this page titled "Figure 2. Screen Shot from Rhino3D" you'll see the contour on the left side where it goes from a rectangle (heel of the neck) and transitions to the neck.

    Making CNC Guitars with MeshCAM

    How do you create this transition? Going from a rectangle to a semicircle?

    I'm also going to have another transition from the headstock to the neck.


    dinky

    Similar Threads:


  2. #2
    Registered BAMCNC.COM's Avatar
    Join Date
    Sep 2012
    Location
    USA
    Posts
    1543
    Downloads
    0
    Uploads
    0

    Default

    Have you watched any YouTube videos on Rhino? Cadjunkie or someone like that has a tutorial on something exactly like that, if I was infront of Rhino I could tell you more.



  3. #3
    Registered
    Join Date
    Feb 2012
    Location
    usa
    Posts
    83
    Downloads
    0
    Uploads
    0

    Default

    Thanks for your reply,

    I've watched all those videos and they have helped so much.....but I think I figured it out. I used the network surface command along with the options to create the transitions....

    Thanks,
    dinky



  4. #4
    Registered
    Join Date
    Feb 2010
    Location
    usa
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default

    I drew 2 rails and the profiles for the ends of the neck, one arc and one 3 sides of a rectangle. "Sweep 2 rails". "Extrude surface" the 3 sides of the rectangle. move that surface slightly apart from the neck surface and then "blend surfaces".



  5. #5
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: How do you create the transition from heel to neck on a guitar neck?

    I'm a beginner at CAD. Been trying many ways to do neck transitions. So far like this method best because it is easy. There are many ways to do neck transitions but some of those are difficult for folks new to modeling. One of the CAD experts on the MoI forum shared this technique. This model was done in MoI (Moment of Inspiration) - it uses networking and blending - also possible in Rhino. https://www.cnczone.com/forums/attac...d=393194&stc=1https://www.cnczone.com/forums/attac...d=393196&stc=1https://www.cnczone.com/forums/attac...d=393198&stc=1 if you want I can show you how to do it this way.

    Attached Thumbnails Attached Thumbnails How do you create the transition from heel to neck on a guitar neck?-stardustneck1-jpg   How do you create the transition from heel to neck on a guitar neck?-stardustneck2-jpg   How do you create the transition from heel to neck on a guitar neck?-stardustneck3-jpg  
    Vegas Guitars Custom Shop
    http://vegasguitars.com


  6. #6
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: How do you create the transition from heel to neck on a guitar neck?

    How about a picture?

    Vegas Guitars Custom Shop
    http://vegasguitars.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How do you create the transition from heel to neck on a guitar neck?

How do you create the transition from heel to neck on a guitar neck?