Need A Quote RFQ Drilled Aluminum bar


Results 1 to 3 of 3

Thread: RFQ Drilled Aluminum bar

  1. #1
    Member Reallypistauf's Avatar
    Join Date
    Aug 2016
    Location
    United States
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default RFQ Drilled Aluminum bar

    3/4" x 3/4" x 24" aluminum bars (2 needed) drilled as per sketch - holes are drilled 1/2" deep and hole size is so a #8D finish nail can be snuggly inserted into each (#39 drill?).

    Similar Threads:
    Attached Thumbnails Attached Thumbnails RFQ Drilled Aluminum bar-al-bar-004-jpg  


  2. #2
    Member Reallypistauf's Avatar
    Join Date
    Aug 2016
    Location
    United States
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Re: RFQ Drilled Aluminum bar

    Better make it 1/2" thick bars drilled thru. Would have edited request but apparently cannot(?). Also still cannot find out why it keeps saying I am posting from a mobile device when I am not or edit some of my profile info!



  3. #3
    Member jtshop's Avatar
    Join Date
    Feb 2018
    Location
    United States
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Re: RFQ Drilled Aluminum bar

    Is this job still open?

    Sent from my SM-N975U1 using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

RFQ Drilled Aluminum bar

RFQ Drilled Aluminum bar