Need A Quote Simple Aluminum Bars with Rounded Corners


Results 1 to 7 of 7

Thread: Simple Aluminum Bars with Rounded Corners

  1. #1
    Registered
    Join Date
    Feb 2010
    Location
    Canada
    Posts
    59
    Downloads
    0
    Uploads
    0

    Default Simple Aluminum Bars with Rounded Corners

    6061 Aluminun Bar
    0.75" x 0.125" X 14"
    Bar may be extruded with rounded corners on sides, or not, the side rounding is preferred, but not important.
    Ends rounded at 0.045 radius on all 4 edges. No sharp edges on whole part.

    I get a good finish on these using dish scrubbing pads, and would like a finish like that.

    Tolerance 4 thou.

    This is for a patent pending medical device. Very much like an Orthopedic. The final product is worn on the body presses against fabric, so I want to avoid damage from sharp corners.

    Quantities to quote:
    100
    1000
    5000

    Similar Threads:


  2. #2
    Registered cooperjm's Avatar
    Join Date
    Sep 2009
    Location
    USA
    Posts
    106
    Downloads
    0
    Uploads
    0

    Default Re: Simple Aluminum Bars with Rounded Corners

    Do you have a drawing of the item? You can send it to g28Machining@gmail.com.

    Sent from my SM-G955U using Tapatalk



  3. #3
    *Registered User* Jbruno's Avatar
    Join Date
    Dec 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Simple Aluminum Bars with Rounded Corners

    PM sent...

    Jimmy Bruno
    www.stonewellbodies.com


  4. #4
    Registered
    Join Date
    Mar 2008
    Location
    USA
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Simple Aluminum Bars with Rounded Corners

    PM sent

    Thank You

    Matthew Schindler
    Micro Shaped
    Matt@MicroShaped.com



  5. #5
    Registered deanrach's Avatar
    Join Date
    Jun 2005
    Location
    USA
    Posts
    86
    Downloads
    0
    Uploads
    0

    Default Re: Simple Aluminum Bars with Rounded Corners

    Pm sent ...

    Sent from my SM-J320R4 using Tapatalk



  6. #6
    Registered
    Join Date
    Feb 2010
    Location
    Canada
    Posts
    59
    Downloads
    0
    Uploads
    0

    Default Re: Simple Aluminum Bars with Rounded Corners

    I have some changes to my quote.

    This is not a high precision part. When in use, all sides will be touching foam padding, or fabric, so I just need the corners rounded as to not tear into the fabric. 0.045 radius, but 0.04 or 0.05 is ok too. Round all edges, and corners.

    Simple Aluminum Bars with Rounded Corners-roundedcorners-jpg

    Quantities, lengths vary.

    100 pieces:
    20, 11"
    20, 12"
    20, 13"
    20, 14"
    20, 15"

    1000 pieces:
    200, 11"
    200, 12"
    200, 13"
    200, 14"
    200, 15"

    10,000 pieces:
    2000, 11"
    2000, 12"
    2000, 13"
    2000, 14"
    2000, 15"



  7. #7
    Gold Member CROSSHATCH's Avatar
    Join Date
    Sep 2006
    Location
    US
    Posts
    1716
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by bmurph View Post
    I have some changes to my quote.

    This is not a high precision part. When in use, all sides will be touching foam padding, or fabric, so I just need the corners rounded as to not tear into the fabric. 0.045 radius, but 0.04 or 0.05 is ok too. Round all edges, and corners.

    Simple Aluminum Bars with Rounded Corners-roundedcorners-jpg

    Quantities, lengths vary.

    100 pieces:
    20, 11"
    20, 12"
    20, 13"
    20, 14"
    20, 15"

    1000 pieces:
    200, 11"
    200, 12"
    200, 13"
    200, 14"
    200, 15"

    10,000 pieces:
    2000, 11"
    2000, 12"
    2000, 13"
    2000, 14"
    2000, 15"
    Pm'd you, if you could just e-mail me with the address I provided, I'll respond with my quote!

    Kind Regards,

    Jason



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Simple Aluminum Bars with Rounded Corners

Simple Aluminum Bars with Rounded Corners