Aluminum plates with countersink holes

[Hyperryd]

I need 50 of these plates to start with as soon as possible. I should be needing more of these and a couple of different variations soon after. If possible I would like them in a black finish, but I can get them finished locally if it would be too much of a delay. This is a finished part, so I need smooth edges.

5.15 x .250 in 6061 Aluminum Plate

.35 in holes and slots

Holes need countersink to .60 in wide.

No rough edges (give me options)

50 parts with more to follow

Black finish preferred.

Quote raw & black finish if possible.

Thank you.

Similar Threads:

• Aluminum plates with countersink holes
• Laser cutter for Aluminum plates and Acrylic plates in one machine
• Help with counterinking on steel plate - Chatter on countersink holes
• Countersink holes
• 2 aluminum plates

[LEWENZ]

I need 50 of these plates to start with as soon as possible. I should be needing more of these and a couple of different variations soon after. If possible I would like them in a black finish, but I can get them finished locally if it would be too much of a delay. This is a finished part, so I need smooth edges.

5.15 x .250 in 6061 Aluminum Plate

.35 in holes and slots

Holes need countersink to .60 in wide.

No rough edges (give me options)

50 parts with more to follow

Black finish preferred.

Quote raw & black finish if possible.

Thank you.

I have a quote ready. Please email:
lewenz@sbcglobal.net
for private quote.

[FUBAR62172]

pm sent

[deanrach]

PM Sent.

[Hyperryd]

I need 50 of these plates to start with as soon as possible. I should be needing more of these and a couple of different variations soon after. If possible I would like them in a black finish, but I can get them finished locally if it would be too much of a delay. This is a finished part, so I need smooth edges.

5.15 x .250 in 6061 Aluminum Plate

.35 in holes and slots

Holes need countersink to .60 in wide.

No rough edges (give me options)

50 parts with more to follow

Black finish preferred.

Quote raw & black finish if possible.

Thank you.

This job has been awarded. Thanks.


Sent from my iPad using Tapatalk Pro